How do I monitor SS7 Traffic in spectra2?
pradeep 31-August-2007 01:17:31 PM

Comments


www.gl.com/ss7.html
Posted by crouse


www.tmcnet.com/ims/1206/industry-news-1206.htm
Posted by crouse


You may monitor SS7 Traffic in spectra2 by first Open workspace click configuration add sni board configure SNI board click the monitor option in termination area select T1/E1 option select local or loop select line code ,framing type, Frame equalization type select 0db - 30 db option add link to the port click check box click network tab ->click monitor linkset tool enter a name for this monitoring now select protocol link to monitor then OK, RUN, CAPTURE and save the capture.
Posted by HamidAliKhan


Yes the sequence is :

Open workspace ->click configuration-> add sni
board ->configure SNI board ->click the monitor
option in termination area -> select T1/E1 option
-> select local or loop-> select line code
,framing type, Frame equalization type
-> select 0db - 30 db option
-> add link to the port
->click check box
-> click network tab
->click monitor linkset tool
-> enter a name for this monitoring
-> now select protocol
-> link to monitor
-> Click OK, RUN, CAPTURE and save the
capture
Posted by waqqas1


http://www.frame.co.uk/pdf/TekS2_SS7_ISUP.pdf
http://www.maser.com.au/au/SpectraGeneralFlyer_000.pdf

Posted by Hash007


Open workspace ->click configuration-> add sni
board ->configure SNI board ->click the monitor
option in termination area -> select T1/E1 option
-> select local or loop-> select line code
,framing type, Frame equalization type
-> select 0db - 30 db option
-> add link to the port
->click check box
-> click network tab
->click monitor linkset tool
-> enter a name for this monitoring
-> now select protocol
-> link to monitor
-> Click OK, RUN, CAPTURE and save the
capture
Posted by sagitraz


Open workspace ->click configuration-> add sni board ->configure SNI board ->click the monitor option in termination area -> select T1/E1 option -> select local or loop-> select line code ,framing type, Frame equalization type -> select 0db - 30 db option -> add link to the port ->click check box -> click network tab ->click monitor linkset tool -> enter a name for this monitoring -> now select protocol -> link to monitor -> then OK, RUN, CAPTURE and save the capture
Posted by viswanathan


Open workspace ->click configuration-> add sni board ->configure SNI board ->click the monitor option in termination area -> select T1/E1 option -> select local or loop-> select line code ,framing type, Frame equalization type -> select 0db - 30 db option -> add link to the port ->click check box -> click network tab ->click monitor linkset tool -> enter a name for this monitoring -> now select protocol -> link to monitor -> then OK, RUN, CAPTURE and save the capture
Posted by viswanathan



Posted: 07-October-2007 01:07:49 AM By: viswanathan

Open workspace ->click configuration-> add sni board ->configure SNI board ->click the monitor option in termination area -> select T1/E1 option -> select local or loop-> select line code ,framing type, Frame equalization type -> select 0db - 30 db option -> add link to the port ->click check box -> click network tab ->click monitor linkset tool -> enter a name for this monitoring -> now select protocol -> link to monitor -> then OK, RUN, CAPTURE and save the capture

Posted: 07-October-2007 01:07:50 AM By: viswanathan

Open workspace ->click configuration-> add sni board ->configure SNI board ->click the monitor option in termination area -> select T1/E1 option -> select local or loop-> select line code ,framing type, Frame equalization type -> select 0db - 30 db option -> add link to the port ->click check box -> click network tab ->click monitor linkset tool -> enter a name for this monitoring -> now select protocol -> link to monitor -> then OK, RUN, CAPTURE and save the capture

Posted: 29-December-2008 12:08:27 PM By: sagitraz

Open workspace ->click configuration-> add sni
board ->configure SNI board ->click the monitor
option in termination area -> select T1/E1 option
-> select local or loop-> select line code
,framing type, Frame equalization type
-> select 0db - 30 db option
-> add link to the port
->click check box
-> click network tab
->click monitor linkset tool
-> enter a name for this monitoring
-> now select protocol
-> link to monitor
-> Click OK, RUN, CAPTURE and save the
capture

Posted: 30-December-2008 11:18:08 AM By: Hash007

http://www.frame.co.uk/pdf/TekS2_SS7_ISUP.pdf
http://www.maser.com.au/au/SpectraGeneralFlyer_000.pdf

Posted: 31-December-2008 09:18:37 AM By: waqqas1

Yes the sequence is :

Open workspace ->click configuration-> add sni
board ->configure SNI board ->click the monitor
option in termination area -> select T1/E1 option
-> select local or loop-> select line code
,framing type, Frame equalization type
-> select 0db - 30 db option
-> add link to the port
->click check box
-> click network tab
->click monitor linkset tool
-> enter a name for this monitoring
-> now select protocol
-> link to monitor
-> Click OK, RUN, CAPTURE and save the
capture

Posted: 30-January-2009 12:44:58 AM By: HamidAliKhan

You may monitor SS7 Traffic in spectra2 by first Open workspace click configuration add sni board configure SNI board click the monitor option in termination area select T1/E1 option select local or loop select line code ,framing type, Frame equalization type select 0db - 30 db option add link to the port click check box click network tab ->click monitor linkset tool enter a name for this monitoring now select protocol link to monitor then OK, RUN, CAPTURE and save the capture.

Posted: 17-September-2009 07:52:07 AM By: crouse

www.tmcnet.com/ims/1206/industry-news-1206.htm

Posted: 17-September-2009 08:03:38 AM By: crouse

www.gl.com/ss7.html