Viewing Article ID (3420)

clavton 24-February-2009 06:27:18 PM

Comments

When an SLTA is received for the SLTM, the link is considered restored, and level 3 changes the local status to available and in service.

Posted by waqasahmad

When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node.
If all of these values match those configured at the adjacent node then it responds with a Signaling Link Test Acknowledgement (SLTA), sending back the test pattern it received in the original SLTM message

Posted by waqqas1

http://books.google.com.pk/books?id=tBHlc0J7ZAAC&pg=PA160&lpg=PA160&dq=Explain+SLTA+and+SLTM+messages+in+MTP3%3F&source=bl&ots=u6MwIilqSv&sig=7C1AvDmqbQZGjAL9M6RG4c3yhpc&hl=en&ei=_dyoScidHIG86gPRlIm0Bg&sa=X&oi=book_result&resnum=1&ct=result

Posted by Hash007

Posted by jahangir1983

Posted by shaw

Signaling Link Test Message (SLTM)
When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node.

Signaling Link Test Acknowledge (SLTA)
If all of these values match those configured at the adjacent node then it responds with a Signaling Link Test Acknowledgement (SLTA), sending back the test pattern it received in the original SLTM message.

Posted by sagitraz

Posted: 25-February-2009 12:05:20 AM By: sagitraz Signaling Link Test Message (SLTM) When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node. Signaling Link Test Acknowledge (SLTA) If all of these values match those configured at the adjacent node then it responds with a Signaling Link Test Acknowledgement (SLTA), sending back the test pattern it received in the original SLTM message.
Posted: 25-February-2009 05:59:29 PM By: shaw
Posted: 26-February-2009 11:28:25 PM By: jahangir1983 When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node.
Posted: 26-February-2009 11:28:36 PM By: jahangir1983 When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node.
Posted: 26-February-2009 11:28:47 PM By: jahangir1983 When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node.
Posted: 26-February-2009 11:46:47 PM By: jahangir1983 When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node.
Posted: 28-February-2009 01:43:31 AM By: Hash007 http://books.google.com.pk/books?id=tBHlc0J7ZAAC&pg=PA160&lpg=PA160&dq=Explain+SLTA+and+SLTM+messages+in+MTP3%3F&source=bl&ots=u6MwIilqSv&sig=7C1AvDmqbQZGjAL9M6RG4c3yhpc&hl=en&ei=_dyoScidHIG86gPRlIm0Bg&sa=X&oi=book_result&resnum=1&ct=result
Posted: 28-February-2009 11:49:09 AM By: waqqas1 When a link is brought in to service at the MTP2 layer, the MTP3 layer starts the 'signalling link test' process: a signalling link test message (SLTM) is sent by MTP3 on the link to the adjacent node. If all of these values match those configured at the adjacent node then it responds with a Signaling Link Test Acknowledgement (SLTA), sending back the test pattern it received in the original SLTM message
Posted: 02-March-2009 12:30:20 AM By: waqasahmad When an SLTA is received for the SLTM, the link is considered restored, and level 3 changes the local status to available and in service.