4 Knowledge Base

 

 TelecomTrainning.net > Knowledge Base
 Viewing KB Article
Good Afternoon, - Please register or - log-in to your account.
Search
Search   Saved Questions   Ask a question
Keywords 
 
Available categories
LTE
100 of Questions in LTE
CCNA Certification
CCNA Sample Q & A (1000 + Q &A)
(Network +) Certification
(Network +) Sample Q & A (1000 + Q &A)
Networking
General/Interview Q& A on Networking
Home Networking
General/Interview Q& A on Networking
VOIP, SIP & Asterisk
Q & A on VOIP,Ethereal, SIP & Asterisk
Telecom Test Equipments
Q & A on Telecom Test Equipment
PSTN / Wireline
General / Interview Q & A on PSTN / Wireline
LTE, Wireless, 3G ,Diameter and HSS
General/Interview Q & A on LTE, Wireless, 3G ,Diameter and HSS
Telecom General
Any Q & A in Telecom in General

Top Questions
Friends, Describe Secure storage and distribution of A-Keys?
How do I monitor SS7 Traffic in spectra2?
what is the difference between E1 signal & Ethernet signal ?
Explain me the difference between a repeater, bridge and router? Relate this to the OSI model.
What is the difference between BRI & PRI ?
Can you tell me about PBGT?
Guys what is the purpose of Umbrella Cell Approach in GSM ?
how can we explain media gateway in MSc?
What is GGSN?
What is the difference between Electrical-tilt and Mechanical-tilt of an antenna?
What is demarc point?
What is BSC?
Can any one explain me how sms flow will work using ss7 network ?( from physical layer to application layer)
Explain SLTA and SLTM messages in MTP3?
why cellphone towers are painted in red and white?
Hi guys what is WAP?
what is EDAp? what is the functions of EDAP?
wat is the difference betweem MSC & GMSC, & MSS & GCS?
what is sdh?
What is a circuit id?

Guys please help is it possible for Wireless LAN to share Dial-up Internet Service?
areil 30-October-2008 11:12:08 PM

Comments


Yes, it's certainly possible to share dial-up Internet access across a wireless home network or other wireless LAN (WLAN).
Posted by waqasahmad


Yes you can.
Posted by HamidAliKhan


Yes you can do it by connecting WLAN to LAN using bridging method.
And the use its services.
Posted by waqqas1


http://compnetworking.about.com/cs/wireless/f/wlansharedialup.htm
Posted by eric


Yes, it's certainly possible to share dial-up Internet access across a wireless home network or other wireless LAN (WLAN).

Wireless LANs easily support the amount of bandwidth required to share dial-up Internet service. Dial-up runs at such low speeds, however, that Internet connections will perform sluggishly on WLANs, particularly when trying to access it with multiple computers at the same time. Try any of the following approaches to make it all work as well as can be expected.
Wired Router with Wireless Access Point
This option requires three pieces of hardware in addition to wireless network cards for the client computers: a wired broadband router, an external modem, and a wireless access point. Connect the external modem to this router for Internet access, then connect the wireless access point to the router for wireless access. Not all broadband routers support external modems; look for those that feature RS-232 serial ports.
Ad Hoc Mode With Windows ICS
Alternatively, you can try Windows Internet Connection Sharing (ICS) or equivalent software that relies on one computer hosting the Net connection. This option requires at a minimum that the host computer have a modem (either internal or external), and that all wireless network cards be configured for ad hoc (peer-to-peer) mode. This option works best if you only have a few home computers located close to each other.

Those who prefer the first option usually already own a wired broadband router that supports external modems. Because the second option requires neither a wired router nor an external modem, it is usually cheaper and easier to set up for those building new home networks from the ground up.
WiFlyer
You may also consider purchasing the WiFlyer product designed to operate as a dial up router. This option is the simplest to install of the ones discussed here but most expensive in terms of equipment cost.
Other Specialized Wireless Routers
If none of the above options are feasible, you'll need to find a wireless router that features an RS-232 (serial) port in order to share the dial-up line over an external modem. The mainstream models today do not feature such a serial port. Products that do tend to be discontinued models or higher-end routers designed to use dial-up as a failover option. Some residential routers that provide serial ports for external modems are:

* ZoomAir Internet Gateway IG-4165
* SMC Barricade 7004AWB
* Early models of the Apple Airport Base Station
Posted by sagitraz

Q&A Rating

Q&A Rating
Rate This Question and Answer

Related Questions
What should be the SIP response message for ISUP cause value “1 unallocated number”?
why correlators are used in RAKE receivers?
 
Why in full mesh network there is no collapse when a single node on the network fail?
 


Search questions via popularity
Top viewed questions  Top emailed questions  Most printed questions  Most saved questions
 
Copyright © Telecom Training, All Rights Reserved